Troubleshoot mgr in ceph Luminous

Note: change ceph1 according your server hostname

Check auth in ceph 

# ceph auth get mgr.ceph1
exported keyring for mgr.ceph1

[mgr.ceph1]
        key = AQDQn4pZkWQjKRAAmEQ45FZgqDeCL5i6ZhfS0g==
        caps mds = "allow *"
        caps mon = "allow profile mgr"
        caps osd = "allow *"

Create auth if needed by command
ceph auth get-or-create mgr.ceph1 mds 'allow *' mon 'allow profile mgr' osd 'allow *'

Check keying file and content in path /var/lib/ceph/mgr/ceph-ceph1

[root@ceph1 ceph-ceph1]# ls -l

total 4
-rw------- 1 ceph ceph 67 Aug  9 12:38 keyring

[root@ceph1 ceph-ceph1]# cat keyring

[mgr.ceph1]

        key = AQDQn4pZkWQjKRAAmEQ45FZgqDeCL5i6ZhfS0g==

Check mgr in systemd

# systemctl | grep mgr

systemctl reset-failed ceph-mgr@ceph1.service
systemctl enable ceph-mgr@ceph1.service
systemctl start ceph-mgr@ceph1.service

Configure wwwi and mird on ERA virtual appliance

1. Download and Install latest ESET File Security (for example http://download.eset.com/download/unix/esets.x86_64.rpm.bin)

rpm -ihv esets-4.5.6.x86_64.rpm

2. Configure wwwi and mird modules
/opt/eset/esets/sbin/esets_set --section wwwi --set agent_enabled=yes
/opt/eset/esets/sbin/esets_set --section wwwi --set listen_addr="0.0.0.0"
/opt/eset/esets/sbin/esets_set --section wwwi --set username="yourusername"
/opt/eset/esets/sbin/esets_set --section wwwi --set password="yourpassword"
/opt/eset/esets/sbin/esets_set --section mird --set agent_enabled=yes
/opt/eset/esets/sbin/esets_set --section mird --set listen_addr="0.0.0.0"
/opt/eset/esets/sbin/esets_set --section global --set av_mirror_enabled=yes

3. Import your licence
/opt/eset/esets/sbin/esets_lic --import=/root/ERA-Endpoint.lic

4. Restart service
/etc/init.d/esets restart


Config file location is  /etc/opt/eset/esets/esets.cfg

wwwi default port is 8081 and protocol is https

http://support.eset.com/kb3674/
 

Upgrade ceph kraken to luminous in place

1. Remove old ceph-release from all nodes

[ceph1][DEBUG ] Preparing...                          ########################################
[ceph1][WARNIN]         file /etc/yum.repos.d/ceph.repo from install of ceph-release-1-1.el7.noarch conflicts with file from package ceph-release-1-1.el7.noarch

yum remove ceph-release-1-1.el7.noarch

2. Install software on one ceph1 node

ceph-deploy install --release luminous  ceph1

[ceph1][DEBUG ] Complete!
[ceph1][INFO  ] Running command: ceph --version
[ceph1][DEBUG ] ceph version 12.0.2 (5a1b6b3269da99a18984c138c23935e5eb96f73e)
3. Restart services on ceph1

systemctl restart ceph-mon.target
systemctl restart ceph-mgr.target

4. Install software on other nodes ceph2, ceph3

ceph-deploy install --release luminous  ceph2 ceph3

and restart services

systemctl restart ceph-mon.target
systemctl restart ceph-mgr.target

5. Check ceph status

     health HEALTH_OK
     monmap e3: 3 mons at {ceph1=10.1.16.1:6789/0,ceph2=10.1.16.2:6789/0,ceph3=10.1.16.3:6789/0}
            election epoch 96, quorum 0,1,2 ceph1,ceph2,ceph3
      fsmap e27: 1/1/1 up {0=ceph1=up:active}
        mgr active: ceph1 standbys: ceph3, ceph2
     osdmap e4649: 12 osds: 12 up, 12 in
      pgmap v226087: 1608 pgs, 4 pools, 2765 GB data, 691k objects
            5578 GB used, 5151 GB / 10729 GB avail
                1608 active+clean
  client io 10384 B/s wr, 0 op/s rd, 2 op/s wr

On each node restart OSD consistently, wait until the apopriate OSD's are up

systemctl restart ceph-osd.target


[root@ceph1 ceph]# ceph osd tree
ID WEIGHT   TYPE NAME      UP/DOWN REWEIGHT PRIMARY-AFFINITY
-1 10.47839 root default
-2  3.49280     host ceph1
 0  0.87320         osd.0       up  1.00000          1.00000
 3  0.87320         osd.3       up  1.00000          1.00000
 6  0.87320         osd.6       up  1.00000          1.00000
 9  0.87320         osd.9       up  1.00000          1.00000
-3  3.49280     host ceph2
 1  0.87320         osd.1       up  1.00000          1.00000
 4  0.87320         osd.4       up  1.00000          1.00000
 7  0.87320         osd.7       up  1.00000          1.00000
10  0.87320         osd.10      up  1.00000          1.00000
-4  3.49280     host ceph3
12  0.87320         osd.12      up  1.00000          1.00000
13  0.87320         osd.13      up  1.00000          1.00000
14  0.87320         osd.14      up  1.00000          1.00000
15  0.87320         osd.15      up  1.00000          1.00000

and wait health ok

6. Set osd flag
I have the warning:

health HEALTH_WARN
all OSDs are running luminous or later but the 'require_luminous_osds' osdmap flag is not set

Execute:
ceph osd set require_luminous_osds


7. Restart other services

systemctl restart ceph-mds.target

8. Finally check status
[root@ceph1 ceph]# ceph -s
    cluster 2d856a9e-ff9e-4322-bedb-56f3be26b607
     health HEALTH_OK
     monmap e3: 3 mons at {ceph1=10.1.16.1:6789/0,ceph2=10.1.16.2:6789/0,ceph3=10.1.16.3:6789/0}
            election epoch 96, quorum 0,1,2 ceph1,ceph2,ceph3
      fsmap e33: 1/1/1 up {0=ceph1=up:active}
        mgr active: ceph1 standbys: ceph3, ceph2
     osdmap e4674: 12 osds: 12 up, 12 in
      pgmap v227520: 1608 pgs, 4 pools, 2765 GB data, 691k objects
            5573 GB used, 5156 GB / 10729 GB avail
                1608 active+clean
  client io 17394 B/s wr, 0 op/s rd, 2 op/s wr

EBS 12.2.4 VM appliance default passwords

APPS/APPS
system/manager
WLSADMIN - weblogic/welcome1

IBM DS Storage Manager 10.86, 11.20 for x86_64 Linux direct link

IBM DS Storage Manager for x86_64 Linux

https://delivery04.dhe.ibm.com/sar/CMA/SDA/04671/1/SM10.86_Linux_64bit_x86-64_SMIA-10.86.x5.43.tgz

https://delivery04.dhe.ibm.com/sar/CMA/SDA/05mkm/2/SM11.20_Linux_64bit_x86-64_SMIA-11.20.x5.10.tgz

filebeat vsftpd log to logstash

1. Install
yum install filebeat
OR
rpm -ihv filebeat-1.3.0-x86_64.rpm

2. Add service (optional)
chkconfig --add filebeat

3. Edit /etc/filebeat/filebeat.yml

        - /var/log/vsftpd.log
      input_type: log
      include_lines: ["DOWNLOAD", "UPLOAD"]
      document_type: vsftpd

  logstash:
    hosts: ["logstash.local.net:5044"]

4. Debug and check config
filebeat -d "*" -e -c  /etc/filebeat/filebeat.yml

2016/09/09 06:51:15.252655 publish.go:109: DBG  Publish: {
  "@timestamp": "2016-09-09T06:51:10.766Z",
  "beat": {
    "hostname": "ftp",
    "name": "ftp"
  },
  "count": 1,
  "fields": null,
  "input_type": "log",
  "message": "Fri Sep  9 13:51:06 2016 [pid 8989] [user] OK DOWNLOAD: Client \"10.1.1.1\", \"/share/LIST.TXT\", 210 bytes, 64.31Kbyte/sec",
  "offset": 35301580,
  "source": "/var/log/vsftpd.log",
  "type": "vsftpd"
}
2016/09/09 06:51:15.25

5. Start service
service filebeat start

./runInstaller: line 90: [: too many arguments

Issue

[oracle@oim Disk1]$ ./runInstaller
./runInstaller: line 90: [: too many arguments
head: cannot open `/home/oracle/Oracle' for reading: No such file or directory
head: cannot open `SOA' for reading: No such file or directory
head: cannot open `Suite' for reading: No such file or directory
head: cannot open `11.1.1.6.0/Disk1/stage/shiphomeproperties.xml' for reading: No such file or directory
head: cannot open `/home/oracle/Oracle' for reading: No such file or directory
head: cannot open `SOA' for reading: No such file or directory
head: cannot open `Suite' for reading: No such file or directory
head: cannot open `11.1.1.6.0/Disk1/stage/shiphomeproperties.xml' for reading: No such file or directory
./runInstaller: line 192: [: too many arguments
head: cannot open `/home/oracle/Oracle' for reading: No such file or directory
head: cannot open `SOA' for reading: No such file or directory
head: cannot open `Suite' for reading: No such file or directory
head: cannot open `11.1.1.6.0/Disk1/stage/disk.label' for reading: No such file or directory
ERROR: This version of the installer requires a operating system. Please download the appropriate installer for your operating system, or contact Oracle Support.

Solution:
Don't use spaces in install folder(/home/oracle/soa 11.1.1.6)