Reset password on a IBM RSA II for CenOS 5 x86_64

You have to download the following files:
IBM Remote Supervisor Adapter II Daemon for Linux download the file ibm_svc_rsa2_hlp253a_linux_32-64.tgz
IBM Advanced Settings Utility (ASU) for Linux download the file ibm_utl_asu-3.60-asut69k.x86_64.rpm

Step by step instruction:

Open ibm_svc_rsa2_hlp253a_linux_32-64.tgz go to RPMS and extract ibmusbasm64-1.38_rhel5-2.x86_64.rpm
Install ibmusbasm64-1.38_rhel5-2.x86_64.rpm, type and press enter: rpm -ihv ibmusbasm64-1.38_rhel5-2.x86_64.rpm
ibm_utl_asu-3.60-asut69k.i386.rpm or ibm_utl_asu-3.60-asut69k.x86_64.rpm

Install libusb, type and press enter: yum install libusb-devel
Start service ibmasm, type and press enter: service ibmasm start

Make sure it was loaded correctly, type and press enter: tail /var/log/messages and you should find a line: localhost ibmasm: V1.38 IBM RSA II x86-64 device support loaded (RHEL5)
Go to the asu install directory, type and press enter: cd /opt/ibm/toolscenter/asu
Try to get information from your RSA II, type and press enter: ./asu64 show –group rsa You should get a long list of values.
Revert your RSA II back to factory defaults, type and press enter: ./asu64 resetrsa”
Connect the RSA II to your network or computer, it is accessible now on the IP 192.168.70.125 with the default user USERID and the password PASSW0RD (with a digit '0', not a char 'o')

Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II User’s Guide